Flexible and cost-efficient Solid Shine laser projector Designed for single-screen projection and equipped with advanced collaboration technologies for education and corporate use
Flexible and cost-efficient Solid Shine laser projector
Designed for single-screen projection and equipped with advanced collaboration technologies for education and corporate use
- Bright, high-quality images
- Compact and lightweight
- Flexible installation
- Designed for collaboration
- Long-lasting and low maintenance
Bright, high-quality images
The MZ770 series combines outstanding Solid Shine laser with 3LCD technology to produce vivid, crisp images. The projectors offer high brightness of 8,000lm, high WUXGA resolution (MZ770) and a high contrast ratio (3,000 000:1), while the Detail Clarity Processor 4 image processing circuit optimizes images, making them clearer and sharper.
Compact and lightweight
With a small footprint and weighing the MZ770 projectors are compact and lightweight: a practical choice for use in teaching and meeting rooms. What’s more, the projectors are designed with ultra-low noise operation of 28dB in Eco mode – quieter than the sound of writing with a pencil – so the audience can focus on the presenter with no distractions.
Thanks to the MZ770 series’ flexible installation options, the projectors can be used in classrooms and meeting rooms of almost any size. The lenses are interchangeable (compatible with PT-EZ770 series lenses) so the same projector can be used in smaller or larger rooms.
Meanwhile, with the Powered Lens Shift function there’s no need for a ladder when adjusting the lens shift and zoom/focus. Geometric adjustment lets you project onto curved or specially shaped screens and the 360-degree Free settings mean the projector can be installed and project at whatever angle you choose.
Designed for collaboration
The optional wireless ET-WM300 module adds a wide range of collaboration technologies which allow you to project wirelessly from multiple devices, present without a PC, and network and stream content securely. These functions make the MZ770 perfect for student presentations, interactive lectures, training, brainstorming and other collaborative meetings.
Long-lasting and low maintenance
Get up to 20,000 hours of brilliant, high-quality images from the long-lasting laser light source and low-maintenance design. The long-lasting Eco Filter can be used for up to 20,000 hours too, to help save time and avoid the hassle of replacing the filter (especially useful for ceiling mounted projectors). The dust resistant cabinet also helps to reduce maintenance and extend the life of the projector.
The Colour Adjustment function lets you correct slight variations in the colour of individual screens, so screens used near each other match. The MZ770 series also features an ambient light sensor which automatically detects the light levels in the room and adjusts the brightness of the image to make it clearly visible in dark or bright rooms.
Flexible inputs and outputs
MZ770 projectors are DIGITAL LINK-ready, which means they can be connected to a DIGITAL LINK switcher using a single cable which reaches up to 150m, making installation simple and flexible. The projectors can also be connected directly to a wide range of different inputs and outputs.
With the MZ770 series you don’t need a computer to present – just plug in a USB and start projecting straight away using the Plug and Share application.
There are currently no key services available.
There are currently no other services available.
|Brightness||8 000 lumens|
|Resolution||1920 x 1200 pixels|
|LCD panel | Panel size (mm)||19.3 mm diagonal (16:10 aspect ratio)|
|LCD panel | Panel size (inch)||0.76 inch diagonal (16:10 aspect ratio)|
|LCD Panel | Display Method||Transparent LCD panel (x 3, R/G/B)|
|LCD Panel | Drive Method||Active matrix|
|LCD Panel | Pixels||2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels|
|Lens||PT-MZ770/MW730: Powered zoom (throw ratio 1.6-2.8 :1), F = 1.7-2.3, f = 26.8-45.5 mm PT-MZ770L/MW730L: Optional powered zoom/focus lenses|
|Light Source||Laser diode (Class 1) (Class 3R for US models)|
|Screen size (diagonal) (mm)||1.02-10.16 m, 16:10 aspect ratio 1.52-10.16 m with the ET-ELW22, 16:10 aspect ratio|
|Screen size (diagonal) (inch)||40-400 in, 16:10 aspect ratio 60-400 in with the ET-ELW22, 16:10 aspect ratio|
|Brightness*1||8 000 lm|
|Center-to-Corner Uniformity*1||90 %|
|Contrast||3,000,000:1 (Dynamic Mode/Dynamic Contrast 1/2)|
|Optical axis shift | Vertical (from center of screen)||±67 % (powered) (for supplied lens [ELS20]/ELW20/ELT20/ELT21, ELW22; max. ±60 %, ELW21; cannot use optical axis shift function)|
|Optical axis shift | Horizontal (from center of screen)||±35 % (powered) (for supplied lens [ELS20]/ELW20/ELT20/ELT21, ELW22; max ±30%, ELW21; cannot use optical axis shift function)|
|Keystone correction range*2||Vertical: ±25°, Horizontal: ±30°|
|Installation||Horizontal/Vertical, free 360-degree installation|
|Terminals | HDMI In||HDMI 19-pin x 2 (Deep Color, compatible with HDCP), audio signal: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)|
|Terminals | RGB 1 In||BNC x 5 (RGB or YPBPR/YCBCR x 1)|
|Terminals | RGB 2 In||D-sub HD 15-pin (female) x 1 (compatible with component input)|
|Terminals | Video In||Pin jack x 1 (composite video)|
|Terminals | Monitor Out||D-sub HD 15-pin (female) x 1 (RGB x 1) (compatible with RGB or YPBPR/YCBCR)|
|Terminals | Audio In||Pin jack x 2 (L-R), M3 stereo mini jack x 2|
|Terminals | Audio Out||M3 stereo mini-jack x 1 for output|
|Terminals | Serial In||D-sub 9-pin (female) x 1 for external control (RS-232C compliant)|
|Terminals | REMOTE 1 IN||D-sub 9-pin (female) x 1 for external control (parallel)|
|Terminals | Remote 2 In||M3 x 1 for wired remote control|
|Terminals | LAN||RJ-45 x 1 for network connection, 10Base-T, 100Base-TX, compatible with PJLink™ (Class 2)|
|Terminals | DIGITAL LINK||RJ-45 x 1 for network and DIGITAL LINK connection, 100Base-TX, compatible with PJLink™ (Class 2), HDCP, Deep Color|
|Terminals | Memory Viewer/Pairing||USB (Type A) x 1|
|Terminals | DC Out||USB (Type A) x 1, DC 5 V/2 A*3|
|Power Supply||100-240 V AC, 50/60 Hz|
|Built-in Speaker||10 W (monaural)|
|Operating noise*1||35 dB (NORMAL/ECO Mode), TBD (Quiet Mode)|
|Filter||x 1, estimated maintenance time: approx. 20,000 hours*4|
|Cabinet Materials||Molded plastic (PC + ABS)|
|Dimensions (W x H x D) (mm)||PT-MZ770/MW730: 560 x 205*5 x 443 mm (with supplied lens) PT-MZ770L/MW730L: 560 x 205*5 x 428 mm (without lens)|
|Dimensions (W x H x D) (inch)||PT-MZ770/MW730: 22 1/16 x 8 1/16 *5 x 17 7/16 inch (with supplied lens) PT-MZ770L/MW730L: 22 1/16 x 8 1/16 *5 x 16 27/32 inch (without lens)|
|Weight (kg)*6||PT-MZ770/MW730: Approximately 17.1 kg (with supplied lens) or less PT-MZ770L/MW730L: Approximately 16.3 kg (without lens)|
|Weight (lbs.)*6||PT-MZ770/MW730: Approximately 37 lbs (with supplied lens) or less PT-MZ770L/MW730L: Approximately 35.7 lbs (without lens)|
|Operating environment (℃/M)||Operating temperature: 0 °C- 45 °C*7, operating humidity: 20 %-80 % (no condensation)|
|Operating environment (°F/Feet)||Operating temperature: 32 °F -113 °F*7, operating humidity: 20 %-80 % (no condensation)|
|Applicable software/application||Wireless Manager for Windows/Mac, Logo Transfer Software, Multi Monitoring & Control Software, Smart Projector Control, Plug and Share, Wireless Projector Apps for iOS/Android™|
|Note||Note: PT-MZ770L and PT-MW730L deliver the same performance as PT-MZ770 and PT-MW730 but respectively come without a lens. *1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *2 With supplied lens. Value differs when correction for both directions is operated. *3 On standby, power supply is available with Quick Startup set to ON or Power Management set to Ready. *4 Under conditions with 0.15 mg/m3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Estimated maintenance time varies depending on environment. *5 With legs at shortest position. *6 Average value. May differ depending on models. *7 Brightness is limited at operating temperatures higher than 36 °C (96 °F), and projectors cannot be operated at altitudes higher than 2,700 m (8,858 ft) above sea level.|