The PT-RQ50 delivers awesomely bright native 4K images at 50,000 lumens*1 with new red laser enhancing blue laser technology in an optimised dual SOLID SHINE laser-phosphor drive system.
Simplfy & Improve Workflows
Producing 50,000 lm*1 from the same footprint as our 30,000 lm class 3-Chip DLP™ laser models is a true engineering accomplishment. A compact all-in-one body brings significant workfow advantages with simplified transport and installation, and swift setup and adjustment.
Built For Mission Critical Applications
A unique dualised design features dual solid-state laser-phosphor drives, dual power supplies, redundancy circuits for laser modules, and backup video inputs. Meanwhile, hermetically sealed optics and a filter-less design contribute to 20,000 hours*2 maintenance free projection in challenging conditions.
* For laser-phosphor projectors in the single body 50,000 lumens class or higher, as of February 2019.
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.
*2 At this time, brightness will have decreased to approximately 50 % of its original level (Dynamic Contrast Mode )
Click an icon to find out more about the technology used
There are currently no key services available.
There are currently no other services available.
|Projector type||3-Chip DLP™ projector|
|DLP™ Chip | Display Method||DLP™ chip x 3, DLP™ projection system|
|DLP™ chip | Number of Pixels||8,847,360 (4096 x 2160) pixels x 3|
|Light Source||Laser diodes (Blue LD, Red LD)|
|Resolution||Native 4K (4096 x 2160 pixels)|
|Screen size [diagonal]||2.54–38.1 m (100–1,500 in) with new optional lens for PT-RQ50K, 17:9 aspect ratio|
|Lens||New optional lenses for PT-RQ50K (no lens included with this model)|
|Lens shift | Vertical (from center of screen)||±45 % (±25 % with ET-D3QT600, ±30 % with ET-D3QT700/ET-D3QT800, ±40 % with ET-D3QW300) (powered)|
|Lens shift | Horizontal (from center of screen)||±16 % (±8 % with ET-D3QT600, ±10 % with ET-D3QT700/ET-D3QT800, ±14 % with ET-D3QW300) (powered)|
|Keystone Correction Range||Vertical: ±40° (±28° with ET-D3QW300), Horizontal: ±40° (±15° with ET-D3QW300)|
|Installation||Horizontal/vertical, free 360-degree installation|
|Terminals | Multi Projector Sync In||BNC x 1|
|Terminals | Multi Projector Sync Out||BNC x 1|
|Terminals | Serial In||D-sub 9-pin (female) x 1 for external control (RS-232C compliant)|
|Terminals | Serial Out||D-sub 9-pin (male) x 1 for link control (RS-232C compliant)|
|Terminals | REMOTE 1 OUT||M3 stereo mini-jack x 1 for link control|
|Terminals | Remote 2 In||D-sub 9-pin (female) x 1 for external control (parallel)|
|Terminals | DIGITAL LINK||RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible|
|Terminals | LAN||RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible|
|Terminals | Expansion Slot 1||Interface Board for 12G-SDI (ET-MDN12G10) supplied|
|Terminals | Expansion Slot 2||Optional interface boards, SLOT NX compatible|
|Power Supply||AC 200–240 V, 50/60 Hz; AC 100–120 V, 50/60 Hz (Brightness restricted to one fifth with voltage of 100‒120 V)|
|Power Consumption||4,100 W (AC 100–120 V: 1,100 W, Standby Mode: 6 W)|
|Cabinet Materials||Metal (Partly Plastic Mold)|
|Operation noise*1||52 dB|
|Dimensions (W x H x D)||720 x 445 x 1,070 mm (28 11/32˝ x 17 17/32˝ x 42 1/8˝ ) (excluding handle, adjuster feet, and other protruding parts)|
|Operating Environment||Operating temperature: 0–45 °C (32–113 °F)*5 *6 *7 , operating humidity: 10–80 % (no condensation)|
|Applicable Software||Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™|
|Note||*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode. *3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast , under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *4 Average value. May differ depending on the actual unit. *5 The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft). *6 When optional AJ-WM50 wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F). *7 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector.|
|Center-to-corner zone ratio*1||90 %|
|Terminals | USB||USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series) / USB Memory Stick|
|Terminals | REMOTE 1 IN||M3 stereo mini-jack x 1 for wired remote control|
|Weight*4||Approx. 126 kg (278 lbs) (without lens)|
|Terminals | DC Out||USB connector (Type A) x 2 for power supply only (DC 5 V, total of 2 A)|
|Contrast Ratio*1||20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)|
|DLP™ Chip | Panel Size||35.1 mm (1.38 in) diagonal (17:9 aspect ratio)|
|Time until light output declines to 50 %*3||20,000 hours (NORMAL)|
|Light output||50,000 lm*1 / 51,000 lm (Center)*2|